Popular Name： Cable Cutter Sub / Cable Cutter / CCS
Cable Cutter Sub is positioned in the Lubricator String above the Tool Catcher/Ball Check Valve and below the Grease Injection Control Head. In the event of wireline becoming jammed in the grease injection flow tubes, to the extent that no wireline movement (upwards or downwards) is possible, the wireline can be cleanly cut well above the Wireline BOP, thus allowing an easier recovery in stranded armour situations, or cleanly dropping the severed end of the wireline into the well when so required by safety considerations.
A high pressure Hand Pump and 120ft Hydraulic Hose are normal provided with the Cable Cutter Sub no matter Grease and Hydraulic Control Module provided or not.
Feature
1) Suitable for cutting wire up to 15/32” cable.
2) Max. 15000Psi working pressure and H2S service.
3) 2”-10TPI Box x 2”-10TPI Pin connection.
4) Safety shear pinned cutting piston.
Main Parameter
1) Wire size
2) Working Pressure
3) Hand Pump and Hydraulic Hose required or not
4) Service Environment ( STD or H2S )
5) Working Temperature
Note
1) There are Bowen (Type B), Otis (Type O) and our own Quick Union (Type W) for threaded selective.
2) Additional size available on request.
Normal Guarantee Period
12 months after the clients received the Equipment or 13 months after the commodity is shipped from Chinese Harbor.
Information Required When Inquiry
If you will purchase the whole Wireline PCE, please refer to the Information Required When Inquiry in Chapter《Wireline PCE》.
If you purchase the Cable Cutter Sub separately, the Main Parameter information above mentioned will be asked.